- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
HMK PLUS
Hinvert
3500W
230 VAC
170-280 VAC (For Personal Computers) /90-280 VAC (For Home Appliances)
50 Hz/60 Hz (Auto sensing)
7000VA
10 ms (For Personal Computers) ; 20 ms (For Home Appliances)
single output
Pure sine wave
24 VDC
YES
4000W
120A
98%
|
| |
1. Rated power 3.5KW, power factor 1 MPPT ranges 600V~450V
2. High frequency inverter with small size and light weight Pure sine wave AC output
3. Battery charging mode and load working mode can be set
4. Solar and utility grid can power loads at the same time with CAN/RS485 for BMS communication
5. With the ability to work without battery
6. Parallel operation up to 6 units (only with battery connected)
7. The WiFi / GPRS module is a plug-and-play monitoring device to be installed on the inverter. With this device, users can monitor the status of the PV system from the mobile phone or from the website anytime anywhere. (optional, Additional purchase required)
| Model Name | HMK PLUS 3500 24 | |
| RATED POWER | 3500W | |
| INPUT | ||
| Voltage | 230 VAC | |
| Selectable Voltage Range | 170-280 VAC (For Personal Computers) | |
| 90-280 VAC (For Home Appliances) | ||
| Frequency Range | 50 Hz/60 Hz (Auto sensing) | |
| OUTPUT | ||
| AC Voltage Regulation (Batt. Mode) | 230VAC ± 5% | |
| Surge Power | 7000VA | |
| Efficiency (Peak) PV to INV. | 97% | |
| Efficiency (Peak) Battery to INV. | 94% | |
| Transfer Time | 10 ms (For Personal Computers) ; 20 ms (For Home Appliances) | |
| Output Port | Single output | |
| Waveform | Pure sine wave | |
| BATTERY & AC CHARGER | ||
| Battery Voltage | 24 VDC | |
| Floating Charge Voltage | 27 VDC | |
| Overcharge Protection | 33 VDC | |
| Maximum Charge Current | 100 A(From grid) | |
| SOC display | Shows battery State of charge in percentage and in voltage as well | |
| Sleeping Mode | YES | |
| Battery voltage low cut off selectable | 21V-24V | |
| Battery High voltage range selectable | 25V-30V | |
| Works without Battery | YES | |
| SOLAR CHARGER | ||
| Maximum PV Array Power | 4000W | |
| MPPT Range @ Operating Voltage | 60 ~ 450 VDC | |
| Maximum PV Array Open Circuit Voltage | 500 VDC | |
| Maximum Charging Current | 120A | |
| Maximum Efficiency | 98% | |
| PHYSICAL | ||
| Dimension, D x W x H (mm) | 128*300*363 | |
| Net Weight (kgs) | 8.7 | |
| Communication interface | RS485/ Wifi option(BMS Compatible with lithium battery using RS-485) | |
| LCD display | General small LCD | |
| OPERATING ENVIRONMENT | ||
| Humidity | 5% to 95% Relative Humidity(Non-condensing) | |
| Operating Temperature | 0°C - 55°C | |
| Storage Temperature | –15°C - 60°C | |
1. Rated power 3.5KW, power factor 1 MPPT ranges 600V~450V
2. High frequency inverter with small size and light weight Pure sine wave AC output
3. Battery charging mode and load working mode can be set
4. Solar and utility grid can power loads at the same time with CAN/RS485 for BMS communication
5. With the ability to work without battery
6. Parallel operation up to 6 units (only with battery connected)
7. The WiFi / GPRS module is a plug-and-play monitoring device to be installed on the inverter. With this device, users can monitor the status of the PV system from the mobile phone or from the website anytime anywhere. (optional, Additional purchase required)
| Model Name | HMK PLUS 3500 24 | |
| RATED POWER | 3500W | |
| INPUT | ||
| Voltage | 230 VAC | |
| Selectable Voltage Range | 170-280 VAC (For Personal Computers) | |
| 90-280 VAC (For Home Appliances) | ||
| Frequency Range | 50 Hz/60 Hz (Auto sensing) | |
| OUTPUT | ||
| AC Voltage Regulation (Batt. Mode) | 230VAC ± 5% | |
| Surge Power | 7000VA | |
| Efficiency (Peak) PV to INV. | 97% | |
| Efficiency (Peak) Battery to INV. | 94% | |
| Transfer Time | 10 ms (For Personal Computers) ; 20 ms (For Home Appliances) | |
| Output Port | Single output | |
| Waveform | Pure sine wave | |
| BATTERY & AC CHARGER | ||
| Battery Voltage | 24 VDC | |
| Floating Charge Voltage | 27 VDC | |
| Overcharge Protection | 33 VDC | |
| Maximum Charge Current | 100 A(From grid) | |
| SOC display | Shows battery State of charge in percentage and in voltage as well | |
| Sleeping Mode | YES | |
| Battery voltage low cut off selectable | 21V-24V | |
| Battery High voltage range selectable | 25V-30V | |
| Works without Battery | YES | |
| SOLAR CHARGER | ||
| Maximum PV Array Power | 4000W | |
| MPPT Range @ Operating Voltage | 60 ~ 450 VDC | |
| Maximum PV Array Open Circuit Voltage | 500 VDC | |
| Maximum Charging Current | 120A | |
| Maximum Efficiency | 98% | |
| PHYSICAL | ||
| Dimension, D x W x H (mm) | 128*300*363 | |
| Net Weight (kgs) | 8.7 | |
| Communication interface | RS485/ Wifi option(BMS Compatible with lithium battery using RS-485) | |
| LCD display | General small LCD | |
| OPERATING ENVIRONMENT | ||
| Humidity | 5% to 95% Relative Humidity(Non-condensing) | |
| Operating Temperature | 0°C - 55°C | |
| Storage Temperature | –15°C - 60°C | |
